Industrial ON/OFF control

 Digital I/O control

 Contact closure monitoring

 Industrial and lab automation

 Switch status sensing

Features

 16 isolated digital input and 16 isolated digital output

 Various output selection : Relay, PMOS and SSR

 High voltage isolation on all isolated channel(2500Vac)

 No output transition during start-up

 DIN rail wiring board

 Output watchdog on board

Specifications (With Matched Wiring Board)

Main Card -- Input Section

 Input chennal : 16 isolated digital input

 Rated input voltage : DC 24V

 Input logic low voltage (V _IL) : 2.8Vdc(max), 4.5mA(min)

 Input logic high voltage (V _IH) : 8Vdc(min), 3mA(max)

 Switching speed : 2.2KHz max.(with on board debounce circuit)

Main Card -- Output Section

 Output chennal: 16 isolated digital output

 Output rating : 500mA(peak) @ 45Vdc (on board)

 Switching speed : 20KHz(max) (PMOS out only)

                             3A @250Vac, 30Vdc(Relay)

                             1A @48Vdc(NMOS)

                             1A @24Vdc(PMOS)

                              2A @240Vac(SSR)

Main Card -- General

 Insulation resistance : 100M Ohm(min) at 1000Vdc

 Operation temperature : 0 to +70 degree C

 Isolation voltage : 2500Vac 1Min

 Storage temperature : -20 to +80 degree C

 Connector : Two 20-pin male ribbon cable connectors

 Operation humidity : 5~95%  RH, non-condensing

 Dimensions  : 175(W)*110(H) mm, 6.9(W)*4.4(H) in

DIN rail mounted wiring board

ADP9201DIN DIN rail mounted wiring board

 Power Requirement : 24Vdc ± 4Vdc

 Input : 8 with LED indicator

 Output : ADP9201DIN(R)  : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator 

                    ADP9201DIN(N) : 8 NMOS(Sink 1A @48Vdc) with LED Indicator  

                    ADP9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator  

                    ADP9201DIN(S)  : 8 SSR(2A @240Vac) with LED indicator

 Connector : One 20-pin male flat cable connector

 Operation Temperature : 0 to +70 degree C

 Operation Humidity : 5~95% RH, non-condensing

 Dimension : ADP9201DIN(R)/(N)/(P) : 86(W)*103(L)*45(H) mm, 3.4(W)*3.2(L)*2.1(H) in

                          ADP9201DIN(S) : 86(W)*103(L)*50(H) mm, 3.4(W)*4.1(L)*2.0(H) in 

JS51053  20PM DIN rail mounted wiring board

 Connection cable : 20-pin flat cable to connect main and wiring board

 Dimension : 86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in

 Driver, DLL, Demo and Example Program

Manual

Catalog

WinXP/7(32bit)

Win7(64bit)

Win10(32bit)

Win10(64bit)

 Labview

 Hardware

 Software

 Main Card

 Wiring Board

 Library

 Driver

 Demo

PRODUCT

DESCRIPTIONS

 1.

DIO9201

32-channel Digital I/O Card for 16 DI and 16 DO Photo-coupler isolated

 2.

ADP9201DIN(R)

DIN rail mounted wiring board with 16 I/O LED indicators and Relay output for 8 DI, 8 DO

 3.

ADP9201DIN(N)

DIN rail mounted wiring board with 16 I/O LED indicators and NMOS output for 8 DI, 8 DO

 4.

ADP9201DIN(P)

DIN rail mounted wiring board with 16 I/O LED indicators and PMOS output for 8 DI, 8 DO

 5.

ADP9201DIN(S)

DIN rail mounted wiring board with 16 I/O LED indicators and SSR output for 8 DI, 8 DO

 6.

JS51053

DIN rail mounted dummy wiring board

 7.

M23207

20-pin flat cable 1.5M for CN1/CN2

 8.

M23209

20-pin flat cable 3.0M for CN1/CN2