Applications |
|  Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor
|
| Interlock/selective Sw. - Proximity switch |
| Aux. contact of transducer / detector |
| As I/O of S/W PLC Controller | Industrial ON/OFF control |
| Low speed counter | Frequency counter |
| Hardware event capture |
|
Features |
| PCIe plug and play function with card ID for 16 identical cards |
| 32 isolated DI and 32 isolated DO channels |
| High voltage isolation on all isolated channel (2500 Vac) |
| Programmable debounce at 50,100,200, 1K Hz and no de-bounce for input |
| No output transition during start-up | Output status readback |
| External triggered interrupt (on IN07~IN00 and TTL IO07~IO00) |
| Input counter / frequency counter (on IN07~IN00 and TTL IO07~IO00) |
| Keep output state after hot reset (jumper selectable) |
| Watch dog timer with default output on OUT07~OUT00 |
| 32bit timer with time up interrupt |
Specifications (With Matched Wiring Board) |
| Main Card -- Input Section |
| Input channel : 32 isolated digital input |
| ON state : 8Vdc(max) 4mA(min) | OFF state : 12Vdc(min) 3mA(max) |
| Software debounce : No debounce, 50Hz, 100Hz, 200Hz, 1KHz |
| Switching speed : 10KHz max. (limit by photo coupler speed and debounce filter) |
| Interrupt : IN07 ~ IN00, TTL IO07~IO00 |
| Counter/frequency counter : IN07~IN00, TTL IO07~IO00 |
| Main Card -- Output Section |
| Output channel : 32 isolated digital output | Output capacity : 3A@250Vac, 30Vdc (Relay) |
| Switching speed : 20KHz(max)(MOS out only) | 1A @ 24Vdc (PMOS) |
|
| 1A @ 120Vdc (NMOS) with wiring board |
| Main Card -- TTL IO |
| Port : 2 | Direction : software programmable on port base |
| Software debounce : No debounce, up to 8MHz |
| Main Card -- Timer |
| Length : 32-bit @1us | Interrupt : time up interrupt |
| Main Card -- General |
| Card ID : 4-bit | Insulation resistance : 100M Ohm(min) at 1000Vdc |
| Isolation voltage : 2500Vac 1Min | Connector : Centronic type SCSI II 68pin connector |
| Operation temperature : 0 to +70 degree C | Operation humidity : 5~95% RH, non-condensing |
| Storage temperature : -20 to +80 degree C | Dimensions : 165(W)*110(H) mm, 6.5(W)*4.4(H) in |
| DIN rail mounted wiring board |
| ADP8232DIN DIN rail mounted wiring board |
| Power Requirement : 24Vdc ± 4Vdc |
| Input : 32 with LED indicator, 8 digit per group with Green LED at first digit |
| Output : |
| ADP8232DIN(N) : 32 NMOS(Sink 1A @120Vdc) with LED indicator, 8 digit per group with Green LED at first digit |
| ADP8232DIN(P) : 32 PMOS(Source 1A @24Vdc) with LED indicator, 8 digit per group with Green LED at first digit |
| ADP8232DIN(R) : 32 Relay(3A @250Vac, 3A @30Vdc) with LED indicator, 8 digit per group with Green LED at first digit |
| Power indicator : Red LED | Operation temperature : 0 to 70 degree C |
| Connector : One 68-pin SCSI II female connector | Operation humidity : 5~95% RH, non-condensing |
| Dimension : ADP8232DIN(N) : 121(W)*159(L)*47(H) mm, 4.8(W)*6.3(L)*1.9(H) in |
| ADP8232DIN(P) : 121(W)*159(L)*45(H) mm, 4.8(W)*6.3(L)*1.8(H) in |
| ADP8232DIN(R) : 121(W)*204(L)*45(H) mm, 4.8(W)*8.1(L)*1.8(H) in |
| JS51050 25PM DIN rail dummy wiring board |
| Connection cable : D type 25P cable to connect main and wiring board |
| Dimension :86(W)*79(L)*52(H) mm, 3.4(W)*3.2(L)*2.1(H) in |
